Estimating Sheets

 

Construction Specifications

Home » Construction Specifications

 

 

A specification (often abbreviated as spec) can be termed as a type of a technical standard to be referenced by a construction contract template or procurement document. It contains the necessary details concerning the specific requirements to be persuaded by a material, product, or service. The specifications are considered very important for suppliers, purchasers, and users of materials, products, or services in engineering, manufacturing, and business as these specifications cover up a extensive collection of general issues like definitions, bidding requirements, legal responsibilities, claims & payments; with details on specific items with respect to all construction project.

 

CSI (Construction Specifications Institute) is a renowned association that provides the standardization of construction language related with building specifications. CSI offers prearranged instructions for composing specification in their Project Resource Manual. CSI published MasterFormat, an indexing system for categorizing construction data as well as construction specifications. It consists of 50 Divisions, to be applied for integrating facility life cycle and maintenance information into the building knowledge base. Almost the entire CSI approved sections contain performance and safety obligations produced by agencies like the American Society for Testing and Materials (ASTM), Occupational Safety and Health Administration (OSHA), and several other federal and professional organizations. CSI also publish GreenFormat, an online database that includes sustainable product attributes. Manufacturers associated with the construction industry will be able to register product information based on 5 categories in a widespread online questionnaire. All kinds of product information referenced by MasterFormat divisions and titles will be available to designers, specifiers, and building constructors. Given below the detailed lists of construction specifications :-

General Requirements - Division 01

 

This specification will include particular administrative and procedural requisites that belong to all of the Technical Specification sections. The General Requirements consist of specifics relevant directly to a particular project and written independently for each project. These will develop the expansive administrative and procedural conditions inscripted in the General and Supplementary Conditions documents. These will be applicable to the work of ALL Technical Specification sections. This document also sum ups the scope of work, exercise of the site, owner occupancy of building throughout construction, Phased construction activities, numerous prime contract requisites and eliminations and additions to be connected with the Plans. The General Requirements narrate the Contractor's administrative, procedural and other activities which should be submitted by the Contractor. In General Requirements section the following categories will be available.

Administrative

01010 Summary
01020 Allowances
01030 Alternates
01040 Coordination
01060 Regulatory Requirements
01080 Identification Systems
01090 References
Procedural

 

01025 Measurement and Payment
01035 Modification Procedures
01050 Field Engineering
01100 Special Project Procedures
01200 Project Meetings
01300 Submittals such as Construction Schedule, Logs
01400 Quality Control
01600 Material and Equipment
01650 Facility Startup/Commissioning
01700 Contract Closeout
01800 Maintenance
Temporary Activities
01500 Temporary Facilities
The Contractor's Responsibility is to comprise these items in Overhead.
Technical Specifications
Divisions 02 - 16 is known as the Technical Specifications. These construction specifications consist of the written description of the specific requirements regarding with a specific product or system. The specification provisions characterize and set up the quality level processes, standards of work and material standards. Each subsection will describe the scope, technical requirements, performance requirements, material suppliers, and quality requirements. The Construction Specifications Institute (CSI) has build up the following standard MasterFormat numbering system that includes the following Continue

Download Construction Contract Template

Construction Specifications



 

Submit Article  NEW

Estimating Softwares

Takeoff Tools

 
DISCLAIMER: "Autodesk, AutoCAD, Revit, Navisworks, Ecotect, QTO, DWG, 3ds Max, are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. © 2010 Autodesk, Inc. All rights reserved.
HOME | SERVICES | SHEETS | DIRECTORY | CONTACT | STUDY | ABOUT US | PRESS RELEASES | EVENTS | ADVERTISING

Site Design & Develop by

Global Associates

Join Our Email List